Tp-link developed a range of wireless networking products designed for great indoor the C5400  look like high technology upgrade with an antenna attached about 40cm long it comes with a small increasing plate intended to glued tie draped to some hopefullyrepeater tplink net steady piece of building, also has a standard that meant for rising internally on the wall. Both antennae can be replaced with an alternative design.

http // admin

TP-Link Archer C5400 v2 Review

The other parts of the device are small access plate on bottom end provide a weatherproofed entry point for signal ether cable without it being visible.

Wifi performance goes were impressed connecting right next to router, download speeds of 74.3 Mbps on 5GHz band and 66 Mbps on 2.4GHz, the speed on the second floor of building and pleased to note even at distance the speeds of 5GHz network remained consistent at 74Mbps down 17.9 up, 2.4GHz band did from more significantly with 62Mbps down and 17MBps up.

The problem for any network infrastructure is equipment is needed there is no service specifically power, running a network cable is easy havingpower socket placed in roof space can be time-consuming and costly exercise there is a technology repeater tplink net called PoE here a limited amount of power can be piped the data down wires in the ethernet cable.

You get a small power adapter with combined ethernet port in the box this can be split out the end of network cable is connecting to switch if you have series of this device you can but PoE capable switch automatically detects that PoE device is connected at other end and send power.

Read more

Generally a router is used to broadcast Wi-Fi signals to access internet in an apartment or small home. And this looks quite satisfying to cover different area of our home with Wi-Fi, but sometime we might require Wi-Fi signals to be rebroadcasted for good connectivity which can be achieved by extenders.


Extender plays an important role to rebroadcasted the signals of our Wi-Fi and make it reachable over entire home. Although Extenders are easy to use, still to maintain Wi-Fi extenders we can use some tips and tricks for better response.

http // admin brings you some good tips and tricks to maintain Wi-Fi extender.

Maintaining Wi-Fi Extenders

Correct Placement

Router’s Wi-Fi signal is rebroadcasted by a extender, so it is highly important to maintain correct distance in between router and extender.

Start measuring the Wi-Fi signal strength broadcasted by router at different places in your home, wherever the signal strength is low, try to find a circuit nearby and plug your extender. It will be good if this measurement is done in one direction from router.

Upstairs and downstairs

If you have a home with stairs then even putting router and extender at different floors (above or below) will not solve your problem of low signal strength. For this we will need to maintain height between router and extender.
You can put router at some height at downstairs and extender at upstairs. But extender should be at minimum height. This will decrease the height between router and extender.

Network name and password for extender

If we put common network name and password for our router and password then it will be good for connectivity point of view.

Same network name and password facilitates us to freely roam in between ranges of router and extender without reconnecting with network.

Read more